Hydraulic Pumps Category

(41 companies)
State: AZ, BC, CA, GA, Haryana, IL, IN, MA, ME, MI, MN, MS, NC, NY, OH, OK, PA, SD, TN, TX, WI
  • Rexroth

    Rexroth offers vane, swash-plate, radial piston, gear, and bent axis hydraulic pumps. Model PVV/PVQ fixed displacement vane pumps can handle flows ranging from 26 to 100 l/min, speeds ranging from 600 to 2500 RPM, and displacement ratings ranging from 18 to 193 cm3. These pumps feature a compact design, optional drive shafts, clockwise/anti-clockwise rotations, low wear, and a long bearing life. They have fixed displacement operation applications.

    State: CA
  • Eaton

    Eaton offers hydraulic pumps in the following configurations: vane, external gear, mobile/industrial piston open circuit, and mobile/industrial piston closed circuit. VPF Series vane pumps can handle speeds up to 3000 r/min, pressures up to 4250 PSI, and transient operating temperatures up to 210°F. These pumps have mobile and industrial applications.

    State: OH
  • HTI

    HTI Hydraulics offers a full line of hydraulic pumps, including hand, air driven, custom, and electric. Electric-operated hydraulic pumps feature output pressures up to 21,750 PSI, hydraulic reservoir capacities up to 6.8 gal/l, and 120V/15A in required electrical service. These pumps are constructed from stainless steel materials, and they have applications for hydraulic nuts/tensioners.

    State: TX
  • Grainger

    Grainger produces hydraulic pumps in a variety of configurations. Model P-392FP ENERPAC hydraulic foot pumps feature pressures up to 10,000 PSI, 0.16 gallon reservoir capacities, glass-filled nylon reservoirs, and an aluminum construction. These pumps come in heights up to 18-3/8", widths up to 7-3/4", and lengths up to 24-1/8".

    Lake Forest
    State: IL
  • Parker

    Parker offers variable displacement, fixed displacement, and power unit hydraulic pumps. Model PV/PVT variable displacement unit pumps come in sizes ranging from 16 to 41 CC, and they have the following controls options: volume stop, remote pressure compensation, horse power limiting, load sensing, etc. These pumps can handle pressures up to 3600 PSI and speeds ranging from 2800 to 3000 RPM.

    State: OH
  • Enerpac

    Enerpac manufactures air hydraulic pumps in a variety of configurations, including ultra-high pressure, modular, foot, Turbo II, air-driven foot, etc. PA-Series air hydraulic foot pumps feature multiple position mounts, hold/retract operations, swivel couplings, and a rugged/long-living construction. These pumps can handle output flow rates up to 0.65 l/min, air pressures up to 4 Bar, and oil capacities up to 1311 cm3.

    State: WI
  • RAM-PAC International

    RAM-PAC International offers hydraulic pump systems in a variety of configurations. 180 Series power pumps feature usable oil capacities ranging from 106 to 482 in3, flow capacities ranging from 12 to 260 in3/min, and operating pressures up to 10,000 PSI. These pumps feature factory-installed pilot valves, full reservoirs, field adjustable relief valves, and universal electric motors. They come in air motor or universal electric configurations, and and they range in height from 16-1/2" to 18".

    State: WI
  • Star Hydraulics

    Star Hydraulics manufactures a wide range of cylinders and hydraulic pumps, including hydraulic post straighteners, hydraulic jacks, oil reservoirs, 4-way valve pumps, stainless steel pumps, double-acting pumps, single/two-speed pumps, etc. 4-way valve pumps can handle pressures ranging from 500 to 10,000 PSI, volume per stroke ratings ranging from 0.29 to 4.71 in3, and reservoir volumes ranging from 70 to 250 in3.

    State: IL
  • Duplomatic Oleodinamica

    Duplomatic Oleodinamica designs and manufactures a variety of hydraulic pumps for industrial applications. Model VPPM variable displacement axial-piston pumps can handle displacements up to 87 cm3/rev, delivery pressures up to 350 Bar, rotation speeds ranging from 1850 to 3000 RPM, and fluid temperatures ranging from -25 to +80°C.

  • Zinko Hydraulic Jack

    Zinko Hydraulic Jack manufactures hydraulic air and hand pumps in a variety of configurations. Model ZAP-104 air pumps feature pressure ratings up to 10,000 PSI, air consumption ratings ranging from 9 to 10 SCFM, and sound rate limits up to 90 dBA. These pumps feature an all-metal motors, two-stage release mechanisms, internal relief valves, and a lightweight plastic housing.

    State: CA
  • Dynex

    Dynex manufactures a wide range of hydraulic components and power units, including remote proportional actuators, hydraulic power units, pressure control valves, high pressure pumps, special fluid pumps, etc. Standard power units can handle flows to 200 GPM, pressures ranging from 3,000 to 10,000 PSI, and horsepower ratings ranging from 0.25 to 75 HP. These units can be constructed with stainless steel 500 gallon capacity reservoirs.

    State: MA
  • Linde

    Linde offers offers high pressure pumps for a variety of applications. HPV-02 model variable displacement pumps can handle speeds up to 3700 RPM, nominal pressures up to 420 Bar, continuous input torques up to 1115 Nm, and displacements up to 280 cm3/rev. These pumps feature noise optimization, long service lives, dynamic response times, high power densities, and a compact design.

  • MTE Hydraulics

    MTE Hydraulics offers 200 Series, 300 Series, and 400 Series hydraulic gear pumps. These pumps feature displacements ranging from 0.5 to 35 GPM, pressure ratings ranging from 1200 to 3000 PSI, and speeds ranging from 1750 to 5000 RPM. They have fluid transfer, mobile/agricultural equipment, construction, and material handling applications.

    State: IL
  • Oilgear

    Oilgear offers legacy, fixed, and variable hydraulic pumps for heavy-duty applications. Variable hydraulic pumps feature peak pressure ratings ranging from 4250 to 7250 PSI, displacements ranging from 0.66 to 33.57 in^3/rev, and RPM ratings ranging from 3600 to 2200 RPM. Flange mount configuration options include 2-bolt, 4-bolt, SAE, ISO, etc.

    State: WI
  • S.A.M. Hydraulik

    Sam hydraulik manufactures a variety of hydraulic pumps including the H1C series variable displacement bent axis, axial piston pump with a displacement range from 6.067 to 225.1 cm³/rev or the H1V series of variable displacement axial piston pumps, with bent axis design, for operation in open circuit and a max torque of 1613 Nm.

  • Simplex

    Simplex manufactures G Series standard electric and compact food pump platform hydraulic pumps. G1 Series electric power pumps feature horsepower ratings to 0.5 HP, pressures up to 10,000 PSI, amd flows up to 250 cu. in./min. Model GA90 foot pumps are constructed with pressure relief valves, and they have a rugged all-metal construction.

    State: IL
  • Continental Hydraulics

    Continental Hydraulics is a manufactures pressure compensated, variable displacement pumps in axial piston, PVR vane, and PVX vane configurations. PVX vane pumps can handle operating pressures ranging from 200 to 3000 PSI and capacities ranging from 8 to 75 GPM. These pumps feature shock clippers, tandem cover options, balanced vane tips, pressure compensated controls, and one-piece/heavy duty rotors. Applications include metal stamping, oil field equipment, aerospace ground support, foundries, machine tools, food processing equipment, etc.

  • AZ Hydraulic Engineering

    AZ Hydraulic Engineering offers AZ1 Series and AZ2 Series air-operated hydraulic pumps for water and oil applications. These pumps feature trouble-free operations, static pressure holding capabilities, and infinitely variable output flows/pressures. They are constructed from chrome, nitrile, stainless steel, cold rolled plated steel, carbon steel zinc, and anodized aluminum materials.

    State: AZ
  • BakerCorp

    Baker Corp. is a manufactures of submersible hydraulic pumps for a variety of sewer bypass applications, including gravel pit de-watering, quarry de-watering, mine de-watering, etc. These pumps can handle flows up to 1750 GPM, shut-off heads ranging from 65' to 130', operating speeds ranging from 1200 to 2200 RPM, and operating temperatures ranging from 150 to 190°F. They are constructed from carbon steel or cast iron materials, and they feature discharges ranging from 4" to 6".

    State: AL
  • HYSECO

    HYSECO produces a variety of hydraulic pumps, including bearing pumps and high pressure bushing pumps. GP110 Series PTO dump pumps feature speeds up to 2400 RPM, pressures ranging from 138 to 2500 PSI, and flows up to 104.40 LPM.

    State: TX