K/M Specialty Pumps and Systems, Inc.

Entries

• in Air Operated Diaphragm Pumps

  K/M Specialty Pumps and Systems, Inc. offers the EXPert series of metallic air operated diaphragm pumps featuring 1/2" to 3" sizes, flow rates from 12 gpm to 275 gpm, discharge pressures of 100 psi or 120 psi and dry suction lift of 9.1 ft to 19 ft with construction materials including aluminum, cast iron, Hastelloy and stainless steel. Non-metallic air operated diaphragm pumps are also available from 3/8" to 2" in size with flow rated from 10.6 gpm to 184 gpm, discharge pressures to 120 psi and dry suction lift to 14'.

  • Air Operated Diaphragm Pumps

• in Centrifugal Pumps

  K/M Specialty Pumps and Systems distributes various type of centrifugal pumps. Range of variations include small centrifugal pumps, end suction centrifugal pumps, in-line mounted centrifugal pumps, and multi-stage vertical in-line centrifugal pumps. Small centrifugal pumps feature a capacity range from 70 to 230 gpm and maximum pressure range from 25 to 155 psi.

  • MTH Small Centrifugal Pumps
  • End Suction Centrifugal Pumps
  • End Suction Centrifugal CHEMFLO Pumps
  • In-Line Mounted Centrifugal Pump
  • Multi-Stage Vertical In-Line Centrifugal Pump

• in Chemical Pumps

  K/M Specialty Pumps and Systems carries Series AA, B, and C chemical metering pumps by LMI, which offer max outputs of 2.0, 7.0, and 25.0 GPH, and max pressures of 2.5, 150, and 300 psi, respectively. In addition, the Model DWP/DWPM pumps, with a capacity to 2,000 GPM, are designed for dewatering service even in the most contaminated fluids, such as construction sites, mines, and aquaculture. Other stocked products include piston pumps, grease pumps, end suction and inline pumps, sump and sewage pumps, and vertical turbine pumps.

  • Chemical metering Pumps

• in Dewatering Pumps

  K/M Specialty Pumps and Systems, Inc. offers DWP/DWPM dewatering pumps. Pumps cave a 2000 GPM capacity and heads to 340 ft. They feature a heavy duty motor, tandem upper and lower tungsten carbide mechanical seals, sand guard seal housing, and a maximum water temperature of 104°F. Applications include: construction, mining, power stations, steel mills, and aquaculture.

  • DWP/DWPM Dewatering Pumps

• in Diaphragm Pumps

  K/M Specialty Pumps and Systems carries both metallic and non-metallic models of EXPert Series air-operated diaphragm pumps. The metallic pumps come in combinations such as aluminum/stainless steel and aluminum/cast iron/Hastelloy/stainless steel, with maximum flows from 12 to 275 gpm and a maximum solid size of 0.375". The non-metallic models are available in acetal/polypropylene/PVDF or polypropylene/PVDF, and provide a maximum flow up to 184 gpm and maximum pressure to 120 psi. Maximum solid is up to 0.25" and maximum dry suction life is 14 ft.

  View Their Complete Line of Diaphragm Pumps

  • Metallic Air Operated Diaphragm Pumps
  • Non-Metallic Air Operated Diaphragm Pumps

• in Gear Pumps

  K/M Specialty Pumps & Systems is a supplier of numerous pump types including electric gear pumps, electric grease gear pumps, and turbine gear pumps.

  Website

• in Grinder Pumps

  K/M Specialty Pumps and Systems' line of grinder pumps includes submersible centrifugal grinder pumps, standard grinder pumps, high performance grinder pumps, and positive displacement grinder pumps. The submersible, positive displacement and high performance pumps feature discharge sizes of 1-1/4" NPT and maximum liquid temperature of 140F. The standard pumps are available with discharge sizes of 2" HPT, and a semi-open 5 vane impeller.

  • Submersible Centrifugal Pumps
  • High Performance Pumps
  • Standard Pumps
  • Positive Displacement Pumps

• in Piston Pumps

  K/M Specialty Pumps & Systems distributes Tri-Rotor brand rotary piston pumps that feature flows of up to 30 GPM to 220 GPM, and optional flows from 20 GPM to 430 RPM. These piston pumps are available with 1 1/2" tapped ports, 2" tapped port, 3" flanged port, 4" flanged ports, and 4" top suction x 3" side discharge ports.

  View K/M's Complete Line of Piston Pumps

  • PN1: Up to 30 gpm
  • PN3: Up to 40 gpm
  • PN4: Up to 80 gpm
  • PN5: Up to 100 gpm
  • PN7: Up to 200 gpm

• in Regenerative Turbine Pumps

  K/M Specialty Pumps and Systems distributes multi-stage regenerative turbine pumps manufactured by MTH. Suited for low flow applications ranging from 2 to 38 GPM, the pumps feature maximum pressure of 1000 psi, and head pressures to 2300 feet. The pumps are available in closed coupled, vertical base mounted configurations.

  • Single Stage
  • Single Stage, Close Coupled
  • High pressure, Multi-Stage

• in Self-Priming Centrifugal Pumps

  KM Specialty Pumps supplies self-priming centrifugal pumps manufactured by MP Pumps. The self-priming pumps head at 100 to 230 feet, and feature a flow of 100 to 750 GPM. Depending on model, the pumps can handle solids up to 0.56", 0.6", 0.625", or 0.65' in size.

  • Flomax 5: 1 1/2" NPT
  • Flomax 8: 2" NPT Stainless
  • Flomax 10: 2" NPT
  • Flomax 15: 3" NPT, Stainless
  • Flomax 30: 3" NPT

• in Slurry Pumps

  K/M Specialty Pumps & Systems Inc. supplies several single stage, sludge and slurry pumps that feature flows up to 1025 GPM or 2600 GPM, and heads up to 240 feet or 160 feet. The slurry pumps also feature operating temperatures up to 180F or 250F, and horizontal or vertical configurations.

  • Wet Pit Sump (Single Stage) and Sewage Pump 650-660 Series: Flow: up to 2600 gpm/164.1 lps
  • Vertical Wet Pit Sump (Single Stage) and Sewage Pump 670 Series: Flow: up to 1025 gpm/64.7 lps

• in Submersible Pumps

  K/M Specialty Pumps and Systems provides sump and sewage pumps for submersible conditions. Various configurations available for these pumps includes single stage, wet put, horizontal and vertical designs. These models are suited for an array of applications including condensate service, light duty, dirty liquid service, heavy duty, medium duty, non-clog sewage treatment, sludge and slurry pumping, food processing, and abrasive mixtures.

  Website

• in Submersible Sewage Pumps

  Distributor of single-stage wet pit, sump, and sewage pumps Thee 610 series features flow up to 20000 GPM, head up to 250 feet, and temperature up to 250F. Other wet pit, sump, and sewage pump models feature maximum flows ranging from 25 GPM to 2600 GPM, and maximum head from 90 feet to 240 feet. Applications include light-duty sump service, condensate service, heavy-duty vertical wet pits, dirty liquid service, food processing, sludge and slurry pumping, abrasive mixtures, and flushing of clean water and lubrication.

  • Single Stage Vertical Wet Pit, Sump and Sewage Pump : 7 models,, 1025-20000 gpm

• in Submersible Sump Pumps

  K/M Specialty Pumps and Systems distributes single stage, submersible sump pumps with maximum flows ranging from 1000 GPM to 20000 GPM. Depending on model, the sump pumps head up to 90 feet, 160 feet, 180 feet, 240 feet, and 250 feet. The pumps can handle temperatures up to 180F, 190F, and 250F; and are used for sludge and slurry pumping. The pumps are also used in food processing, abrasive mixture, sewage treatment, condensate service, and dirty liquid service applications.

  • Single Stage Vertical Wet Pit, Sump Pump: 7 models, 1025-20000 gpm

• in Submersible Water Pumps

  K/M Specialty Pumps and Systems manufactures submersible water pumps used to dewater contaminated fluids found at construction sites, mines, power stations, and steel mills. The water pumps have a maximum capacity of 2000 GPM, head to 340 feet, and can handle water temperatures up to 104F. Features of the water pumps include: a heavy-duty motor with oversized shaft and bearing; a hardened 410 SS impeller; and a Sand Guard seal that prevents sand and debris from collecting on the outer seal face during operation.

  Website